ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 34

Страница: 34 / 491

Chapter 2 Hardware Installation and Connection

XGS-4526/4528F/4728F User’s Guide

Note: Do NOT block the ventilation holes. Leave space between devices when

stacking.

Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front

and 3.4 inches (8 cm) at the back of the Switch. This is especially important for
enclosed rack installations.

2.2 Mounting the Switch on a Rack

This section lists the rack mounting requirements and precautions and describes
the installation steps.

2.2.1 Rack-mounted Installation Requirements

• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.

2.2.1.1 Precautions

• Make sure the rack will safely support the combined weight of all the equipment

it contains.

• Make sure the position of the Switch does not make the rack unstable or top-

heavy. Take all necessary precautions to anchor the rack securely before

installing the unit.

2.2.2 Attaching the Mounting Brackets to the Switch

Position a mounting bracket on one side of the Switch, lining up the four screw
holes on the bracket with the screw holes on the side of the Switch.

Figure 6

Attaching the Mounting Brackets

Содержание XGS-4528F












































































































































































































































































































































































































































































































Результаты поиска

Содержание XGS-4528F

Отзывы:

ZyXEL Communications XGS-4528F, Руководство пользователя, Страница: 34 / 491

Результаты поиска

Содержание XGS-4528F

Отзывы: