ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 312 | Manualshive

Страница: 312 / 491

ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 312

Chapter 32 Error Disable

XGS-4526/4528F/4728F User’s Guide

312

The following table describes the labels in this screen.

Table 105

Advanced Application > Errdisable > Errdisable Detect

LABEL

DESCRIPTION

Cause

This field displays the types of control packet that may cause CPU
overload.

*

Use this row to make the setting the same for all entries. Use this row
first and then make adjustments to each entry if necessary.

Note: Changes in this row are copied to all the entries as soon as you

make them.

Active

Select this option to have the Switch detect if the configured rate limit for
a specific control packet is exceeded and take the action selected below.

Mode

Select the action that the Switch takes when the number of control
packets exceed the rate limit on a port, set in the Advanced Application
> Errdisable > CPU protection screen.

• inactive-port - The Switch disables the port on which the control

packets are received.

• inactive-reason - The Switch bypasses the processing of the

specified control packets (such as ARP or IGMP packets), or drops all

the specified control packets (such as BPDU) on the port.

• rate-limitation - The Switch drops the additional control packets the

port has to handle in every one second.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

«
...
310
311
312
313
314
...
»

Содержание XGS-4528F












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов