ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 179

Страница: 179 / 491

Chapter 17 Link Aggregation

XGS-4526/4528F/4728F User’s Guide

179

17.3 Link Aggregation Status

Click Advanced Application > Link Aggregation in the navigation panel. The
Link Aggregation Status screen displays by default. See

Section 17.1 on page

177

for more information.

Figure 73

Advanced Application > Link Aggregation Status

The following table describes the labels in this screen.

Table 41

Advanced Application > Link Aggregation Status

LABEL

DESCRIPTION

Group ID

This field displays the group ID to identify a trunk group, that is, one
logical link containing multiple ports.

Enabled Port

These are the ports you have configured in the Link Aggregation screen
to be in the trunk group.

The port number(s) displays only when this trunk group is activated and
there is a port belonging to this group.

Synchronized
Ports

These are the ports that are currently transmitting data as one logical link
in this trunk group.

Aggregator
ID

Link Aggregator ID consists of the following: system priority, MAC
address, key, port priority and port number. Refer to

Section 17.2.1 on

page 178

for more information on this field.

The ID displays only when there is a port belonging to this trunk group
and LACP is also enabled for this group.

Содержание XGS-4528F












































































































































































































































































































































































































































































































Результаты поиска

Содержание XGS-4528F

Отзывы:

ZyXEL Communications XGS-4528F, Руководство пользователя, Страница: 179 / 491

Результаты поиска

Содержание XGS-4528F

Отзывы: