ZyXEL Communications WRE6505 v2, Руководство пользователя

Страница: 49 / 132

WRE6505 v2 User’s Guide
49
C
H A P T E R
9
Wireless LAN
9.1 Overview
This chapter discusses how to configure the wireless network settings in your WRE6505 v2. See
Section 1.1 on page 9 for an overview of wireless networks.
9.2 What You Can Do
• Use the General screen to enable the Wireless LAN (2.4G/5G), enter the SSID and select the
wireless security mode ( Section 9.4 on page 51 ).
• Use the AP select screen to choose an access point that you want the WRE6505 v2 (in repeater
mode) to connect to. You should know the security settings of the target AP ( Section 9.6 on page
57 ). This screen is available only when the WRE6505 v2 is in repeater mode.
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the WRE6505 v2 ( Section 9.7 on page 60 ).
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold ( Section
9.8 on page 61 ).
• Use the QoS screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS). This allows the
WRE6505 v2 to automatically set priority levels to services, such as e-mail, VoIP, chat, and so on
(
Section 9.8 on page 61 ).
• Use the WPS screen to enable WPS to quickly set up a wireless network with strong security,
without having to configure security settings manually ( Section 9.10 on page 62 ).
• Use the WPS Device screen to add a wireless station using WPS ( Section 9.11 on page 63 ).
• Use the Scheduling screen to set the times your wireless LAN is turned on and off ( Section 9.12
on page 64 ). This screen is available only when the WRE6505 v2 is in AP mode.
9.3 What You Should Know
Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
• If two wireless networks overlap, they should use different channels.
Like radio stations or television channels, each wireless network uses a specific channel, or
frequency, to send and receive information.