ZyXEL Communications VMG8029, Быстрый старт

Страница: 13 / 20

©2017 | 13
Ports and buttons
Front panel
Rear panel
Resetting the device to its factory settings
To reset the gateway to its factory settings, press the reset button RES until the
PWR LED flashes red. After about 2 minutes, the gateway will be operational again
and can be set up again.
L
NOTE
Resetting interrupts all ongoing telephone calls and Internet connections. If a
custom configuration was set up on the gateway, this will be lost on resetting the
device to its factory settings. Consequently, please save the custom configuration
via the user interface before resetting the device. You can then reload the confi-
guration into the device later. Use a ballpoint pen or something similar to press the
reset switch.
USB ports (2 x USB Host 2.0)
LAN1 - Gateway default IP: 192.168.100.1
LAN2 - Gateway default IP: 192.168.200.1
S
0
1 - S
0
4 ISDN ports
(RJ-45 sockets and 4 clamps)
RES Reset switch
WAN1 (VDSL/ADSL) DSL connection
WAN2 (ETH) Connection of external modem (WANoE)
On/Off switch
LED indicator for operating mode
(master/slave) when cascading
Operating voltage
Connection for 230V power cord
DCL Internal data clock FSC Internal frame clock
EN