ZyXEL Communications VANTAGE CNM 2.0 - Скачать руководство пользователя страница 298

Страница: 298 / 346

Vantage CNM 2.0 User’s Guide

301

SMT Session Begin

An SMT management session has started.

SMT Session End

An SMT management session has ended.

Configuration Change: PC =

0x%x, Task ID = 0x%x

The router is saving configuration changes.

Successful SSH login

Someone has logged on to the router’s SSH server.

SSH login failed

Someone has failed to log on to the router’s SSH server.

Successful HTTPS login

Someone has logged on to the router's web configurator
interface using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator
interface using HTTPS protocol.

Table 133 System Error Logs

LOG MESSAGE

DESCRIPTION

%s exceeds the max.

number of session per

host!

This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.

setNetBIOSFilter: calloc

error

The router failed to allocate memory for the NetBIOS filter settings.

readNetBIOSFilter: calloc

error

The router failed to allocate memory for the NetBIOS filter settings.

WAN connection is down.

A WAN connection is down. You cannot access the network
through this interface.

Table 134 Access Control Logs

LOG MESSAGE

DESCRIPTION

Firewall default policy: [ TCP |

UDP | IGMP | ESP | GRE | OSPF]

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or forwarded
according to the default policy’s setting.

Firewall rule [NOT] match:[TCP |

UDP | IGMP | ESP | GRE | OSPF]

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule.

Triangle route packet forwarded:

[TCP | UDP | IGMP | ESP | GRE |

OSPF]

The firewall allowed a triangle route session to pass
through.

Table 132 System Maintenance Logs (continued)

LOG MESSAGE

DESCRIPTION

Содержание VANTAGE CNM 2.0 -



























































































































































































































































































































































Результаты поиска

Содержание VANTAGE CNM 2.0 -

Отзывы:

ZyXEL Communications VANTAGE CNM 2.0 -, Руководство пользователя, Страница: 298 / 346

Результаты поиска

Содержание VANTAGE CNM 2.0 -

Отзывы: