ZyXEL Communications VANTAGE CNM 2.0 -, Руководство пользователя

Страница: 179 / 346

Vantage CNM 2.0 User’s Guide
Chapter 12 Configuration > Firewall 182
Figure 79 Configuration >Firewall > Edit
The following table describes the labels in this screen.
Table 66 Configuration >Firewall > Edit
LABEL
DESCRIPTION
Active Check the Active check box to have the ZyXEL device use this rule. Leave it
unchecked if you do not want the ZyXEL device to use the rule after you apply it
Packet Direction Use the drop-down list box to select the direction of packet travel to which you want
to apply this firewall rule.
Action for
matched packets Select whether to Block (silently discard) or Forward (allow the passage of)
packets that are traveling in the selected direction.
Log This field determines if a log is created for packets that match the rule (Match),
don't match the rule (Not Match), both (Both) or no log is created (None). Go to
the Log Settings page and select the Access Control logs category to have the
ZyXEL device record these logs.
Alert Check the Alert check box to determine that this rule generates an alert when the
rule is matched.
Source Address Click Add to add a new address, Edit to edit an existing one or Delete to delete
one. Please see the next section for more information on adding and editing source
addresses.
Destination
Address Click Add to add a new address, Edit to edit an existing one or Delete to delete
one. Please see the following section on adding and editing destination addresses.
Available/
Selected Services Highlight a service from the Available Services box on the left, then click >> to
add it to the Selected Services box on the right. To remove a service, highlight it in
the Selected Services box on the right, then click <<.