ZyXEL Communications STB-1001S, Руководство пользователя

Страница: 53 / 137

Chapter 5 Product Specifications
STB-1001S User’s Guide
53
Wall-mounting Instructions
"
It is recommended that you do NOT wall-mount the STB. Wall-mounting kit is
not included.
Complete the following steps to hang your STB on a wall.
"
See Table 9 on page 51 for the size of screws to use and how far apart to place
them.
1 Select a position free of obstructions on a sturdy wall.
2
Drill two holes for the screws.
1
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the STB with the connection cables.
5 Align the holes on the back of the STB with the screws on the wall. Hang the STB on the
screws.
Power Consumption
Safety Standards UL (UL 1950), CSA (CSA 22.2)
CE mark, EN60950 (2001)
T-Mark
C-tick, QAS
Table 12 Power Adaptor Specifications