Add a new page zCfgTryAgain.html. This page will be showed when DSL line has not
up. Modified the zCfgPPPOE.html. Close web redirect once PPPOE user name and
password are right
5 [BUG
FIX]
SPRID:
050817677
Symptom
: MSN message support has some problem.
Condition:
While disable or enable UPNP function in DUT, the Windows XP MSN
6.2 and MSN 7.0 can not establish Whiteboard sharing functions
.
6 [BUG FIX] SPRID:
050817679
Symptom
:while set the DUT LAN “Client IP Pool Starting Address” and “Size of
Client IP Pool” which are not match the “IP Subnet Mask”, but this can be saved in
GUI\Wizard Setup and rom-t. In SMT and GUI\Advanced Setup have no this issue.
Condition
: N/A
7
[BUG FIX] SPRID:
050817680
Symptom
：
If the multicast stream speed goes up to 6Mb or higher then the P660 is not
able to keep up and the multicast stream starts to get choppy (this is brodcast tv signal
being streamed) and it gets unviewable. This goes on for awhile, then the device locks up
and you have to reboot to get it working again.
Condition
: N/A
8. [FETURE CHANGED]
Change default romfile to Access Telecom version
Modification in V3.40(ST.3)C0 | 06/08/2005
1. Change to FCS
Modification in V3.40(ST.3)b2 | 06/01/2005
1. [BUG FIX] SPRID: 050525640
Symptom
: Use backup function in GUI will make LAN pc and DUT WAN can not get
ip.
Condition
: Step1 enter eWC->maintenance->configuration->backup.
Step2 backup current configuration.
Step3 in LAN pc can not get ip from DUT and DUT WAN can not get
dynamic ip.
2. [BUG FIX] SPRID: 050524562
Symptom
: A problem about can’t get ip(enet encap/llc/dynamic)
Condition
: 1. Use”sys romreset”in SMT 24.8
2. Go to WEB wizard or SMT 4, use enet encap/LLC/dynamic ip, set the
vpi/vci=0/33, then the device can’t get ip (use other vpi/vci is ok, our AUT-C set vpi/vci is
0/33).
3. [BUG FIX] SPRID: 050516864
Symptom
: Use ax/4000 test UBR have problem
Condition
: Set menu 4 ATM QoS Type= UBR, Peak Cell Rate (PCR) = 1000, Sustain
Cell Rate (SCR) = 500, Maximum Burst Size (MBS) =500, The traffic do not restrict by
the PCR, it can up to 1600 cells/s.
4. [FEATURE ENHENCE]
Routing Throughput Enhancement.
5. Change Default Rom-file
Add new rule into VC hunting table: VPI/VCI: 0/38 Encapsulation: PPPOA
Multiplexing: VC
