Modification in V3.40(ST.5)b2 | 11/1/2005
1 [BUG
FIX]
SPRID:
051021682
Symptom:
The display of CI command “wan atm vc webredir” has issue.
Condition:
Step1: type in command “wan atm vc webredir”. It will show “usage:
webredict<enable 1 | disable 0>”
Step2: but type in command “wan atm vc webredir 1”, the webrediret is
disable.
type in command “wan atm vc webredir 0”, the webrediret is enable
2 [BUG
FIX]
SPRID:
051021684
Symptom:
subnet mask error
Condition:
1. Log into the device via WEB GUI
2. Config Static WAN IP Address
3. Enter subnet mask
”
255.255.248.0
”
Then it will pop up a message shows
”
subnet mask error
”
. However,
”
255.255.248.0
”
is a valid subnet
Modification in V3.40(ST.5)b1 | 10/19/2005
1.[Feature Enhancement]
Add CI command”WAN node”
Add CI command”sys password”
2. Add multiboot ver. 2.1
3. Change modem code to 3.2.0.7
Modification in V3.40(ST.4)C0 | 09/15/2005
1. Change default rom file according to 3.40(ST.3)C0
Modification in V3.40(ST.4)b2 | 08/24/2005
1. [FETURE ENHANCE]
Modify the zero configuration web pages according to PM’s requirement.
Modification in V3.40(ST.4)b1 | 08/17/2005
1 [BUG FIX] SPRID:
050817671
Symptom:
the testing in progress page will consist endless
Condition
: N/A
2 [BUG
FIX]
SPRID:
050817672
Symptom:
Web redirect can not work well
Condition
: When we input system password and PPPoE username/password and
press the save button, the settings are saved, but no connection testing window is shown up,
but still a window asking for the system password and PPPoE username/password again.
At this time, even if we ‘>d d 1’ in SMT, it can’t trigger PPPoE
3 [BUG
FIX]
SPRID:
050817675
Symptom:
PPPOE/PPPOA idle timeout do not work
Condition
: Step 1.:Set PPPOE idle timeout to 15 and PPPOE/LLC right username
password in menu4, Make sure PC can access the Internet
Step 2: Close all the programs that may send packets. Waiting at least 15s
Then the PPPOE is idle.
Step 3: And now, we can not access the web even if we ‘d d 1’ in SMT
except reboot the device.
4 [FETURE
ENHANCE]
