Prestige 861 VDSL Modem
Commands Introduction
3-1
Chapter 3
Commands Introduction
This chapter describes how to access the Prestige and provides an overview of its commands.
3.1 Command Line Overview
You can use line commands to configure the Prestige. If you have problems with your Prestige, customer
support may request that you issue some of these commands to assist them in troubleshooting.
3.1.1 Command Syntax Conventions
1. Command keywords are in
courier new
font.
2. The
/
symbol means “or”.
3. Type
“
help
” to display a list of valid commands or type a command followed by “
help
” under main
command (see
) to display a list of associated subcommands.
Figure 3-1 CLI Help Example -1
Figure 3-2 CLI Help Example -2
P861:/> help
bmelog - show link up/down log after startup time
exit - logout
passwd - change login passwd
ping - send ICMP echo request message to Host
reboot - reboot system
status - show status
sysconfig - configure system parameters
vdsl - start BME user interface
version - show software version information
P861:/> vdsl
vdsl> help
port - show the information about VDSL port
profile - set and show profile of VDSL port
pvc - set and show the parameters of PVC
version - show Ikanos firmware version
exit - exit UI program
vdsl>
vdsl> port help
port snr - show SNR
port speed - show speed information
port counter - show port statistics
