P-660HW Series Quick Start Guide
3
1 DSL
: Connect the Prestige to a telephone jack using a telephone wire.
2 LAN
: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or
Internet access.
3 POWER
: Use the included power adaptor to connect the POWER socket to an appropriate power source
(see the User’s Guide for power adaptors specifications by region).
After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel
LEDs. The
PWR/SYS
LED blinks while performing system testing. The
PWR/SYS
and/or
WLAN
LEDs then
turn steady on if the testing is successful. The
LAN
LED turns on if the LAN port is properly connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any
one
of these ways:
