ZyXEL Communications Prestige 314 PLUS, Руководство пользователя

Страница: 53 / 138

P314 Broadband Sharing Gateway with 4-Port Switch
4-4 Remote Node Setup
4.2 Editing TCP/IP Options
Move the cursor to the Edit IP field in Menu 11.1 , then press the [SPACE BAR] to toggle and set the value
to Yes . Press [ENTER] to open Menu 11.3 – Network Layer Options .
Figure 4-3 Remote Node Network Layer Options
The next table gives you instructions about configuring remote node network layer options.
Table 4-3 Remote Node Network Layer Options Menu Fields
Field Description Example
IP Address
Assignment
If your ISP did not assign you an explicit IP address, select
Dynamic; otherwise select Static and enter the IP address &
subnet mask in the following fields.
Dynamic
Rem IP
Address If you have a Static IP Assignment, enter the IP address assigned
to you by your ISP.
Rem Subnet
Mask If you have a Static IP Assignment, enter the subnet mask
assigned to you.
My WAN
Addr If you have a Static IP Assignment, enter the gateway IP address
assigned to you.
Single User
Account Use the [SPACE BAR] to toggle Yes and No . See the chapter on
SUA for a full discussion of this feature.
Yes
Metric This field is valid only for PPPoE encapsulation. The metric
represents the “cost” of transmission for routing purposes. IP
routing uses hop count as the measurement of cost, with a
minimum of 1 for directly connected networks. Enter a number that
approximates the cost for this link. The number need not be
precise, but it must be between 1 and 15. In practice, 2 or 3 is
usually a good number. 3
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
Rem IP Addr: N/A
Rem Subnet Mask= N/A
My WAN Addr= N/A
Single User Account= Yes
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.