ZyXEL Communications Prestige 202H Series Скачать руководство пользователя страница 255

Страница: 255 / 309

Prestige 202H User’s Guide

Remote Management

24-1

Chapter 24

Remote Management

This chapter provides information on configuring remote management (SMT menu 24.11).

24.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which Prestige interface
(if any) from which computers.

You may manage your Prestige from a remote location via:

Internet (WAN only)

ALL (LAN and WAN)

LAN only

Neither (Disable)

To disable remote management of a service, select

Disable

in the corresponding

Server Access

field.

24.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

5. A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web

service.

6. You have disabled that service in one of the remote management screens.

7. The IP address in the

Secured Client IP

field does not match the client IP address. If it does not

match, the Prestige will disconnect the session immediately.

8. There is an SMT console session running.

9. There is already another remote management session of the same type (web, FTP or Telnet)

running. You may only have one remote management session of the same type running at one time.

10. There is a web remote management session running with a Telnet session. A Telnet session will be

disconnected if you begin a web session; it will not begin if there already is a web session.

24.1.2 Remote Management and NAT

When NAT is enabled:

Use the Prestige’s WAN IP address when configuring from the WAN.

Содержание Prestige 202H Series






















































































































































































































































































































Результаты поиска

Содержание Prestige 202H Series

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications Prestige 202H Series, Руководство пользователя

Результаты поиска

Содержание Prestige 202H Series

Отзывы:

Бренды по названию

Популярные бренды