ZyXEL Communications Prestige 202H Series, Руководство пользователя

Страница: 138 / 309

Prestige 202H User’s Guide
12-8 Firewalls
Denies all sessions originating from the WAN to the LAN.
Figure 12-5 Stateful Inspection
The previous figure shows the Prestige’s default firewall rules in action as well as demonstrates how stateful
inspection works. User A can initiate a Telnet session from within the LAN and responses to this request are
allowed. However other Telnet traffic initiated from the WAN is blocked.
12.5.1 Stateful Inspection Process
In this example, the following sequence of events occurs when a TCP packet leaves the LAN network
through the firewall's WAN interface. The TCP packet is the first in a session, and the packet's application
layer protocol is configured for a firewall rule inspection:
1. The packet travels from the firewall's LAN to the WAN.
2. The packet is evaluated against the interface's existing outbound access list, and the packet is
permitted (a denied packet would simply be dropped at this point).
3. The packet is inspected by a firewall rule to determine and record information about the state of the
packet's connection. This information is recorded in a new state table entry created for the new
connection. If there is not a firewall rule for this packet and it is not an attack, then
the default
action for packets not matching following rules field determines the action for this packet.
4. Based on the obtained state information, a firewall rule creates a temporary access list entry that is
inserted at the beginning of the WAN interface's inbound extended access list. This temporary