ZyXEL Communications P870HNU-51B, Руководство пользователя

Страница: 6 / 20

6
You may either connect your computer to the router using an Ethernet cable if they are
sufficiently close to each other or by means of a wireless network. Furthermore, you can
simultaneously have certain items of equipment connected to the router using the Ether-
net cable and others as portable through the wireless network.
You can use the wireless network as long
as your computer is equipped with a wire-
less adapter installed or this is integrated
into your equipment.
Your router has enabled the wireless
network by default. If it would not be
enabled, the first step would be to enable
the wireless network for your router. This
is done by pressing the button Wifi loca-
ted at the back of the router within four
seconds (pressing it during eight seconds
would activate the WPS process). The Wifi
indicator will light up in green and will blink
when navigating.
The configuration parameters by default
for your wireless network are shown on
the label at the bottom of your router.
The next step is to configure the compu-
ters on your wireless network in accordan-
ce with your router’s wireless parameters.
A. Connection using wireless network
DSL
Reset
Eth1 Eth2 Eth3 Eth4
USB Wifi
On/Off
12V 1A
Power
Wifi
DSL Reset Eth1 Eth2 Eth3 Eth4 USB Wifi
On/Off
12V 1A
Power
4. Connecting the computer to the router. Two options are available
Start using your VDSL...
For further information please refer to sections 3.5 of the User’s manual on the advanced settings
CD