ZyXEL Communications P-871H Series, Руководство пользователя

Страница: 66 / 101

P-871H Series User’s Guide
Chapter 11 Command Examples 65
11.7.1 sys sw port enable
Syntax:
sys sw port enable <port>
This command activates a port. The following example activates port one.
Figure 37 sys sw port enable Command Example
11.7.2 sys sw port speed
Syntax:
sys sw port speed <port> <auto| 10H|10F| 100H| 100F>
This command sets the speed (
10
or
100
Mbps) and duplex mode (
F
ull or
H
alf duplex) of a
port.
You can also set the port speed and duplex to
auto
. This allows the port to negotiate with a
peer port automatically to obtain the connection speed and duplex mode that both ends
support.
The following example sets port four to transmit at 100 Mpbs in full-duplex mode.
Figure 38 sys sw port speed Command Example
11.7.3 sys sw port status
Synax:
sys sw port status
This command displays the status of all ports on the device. The following figure shows an
example.
Figure 39 sys sw port status Command Example
ras> sys sw port enable 1
ras> sys sw port speed 4 100H
ras> sys sw port status
PORT EN LINK SPEED/DUPLEX FLWCTRL
1 1 DOWN 100M /FULL -------
2 1 DOWN 100M /FULL -------
3 1 DOWN 100M /FULL -------
4 1 UP 100M /FULL -------
ras>