Chapter 5 WAN Setup
P-870HW-51a v2 User’s Guide
62
5.6 Technical Reference
The following section contains additional technical information about the ZyXEL Device
features described in this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The ZyXEL Device can work in
bridge mode or routing mode. When the ZyXEL Device is in routing mode, it supports the
following methods.
IGMP
Multicast
Multicast packets are sent to a group of computers on the LAN and are an
alternative to unicast packets (packets sent to one computer) and broadcast
packets (packets sent to every computer).
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group.
The ZyXEL Device supports both IGMP
version 1 and version 2. Select
Enable
to turn on IGMP. Otherwise, select
Disable
.
PPPoE
Passthrough
(PPPoE
encapsulation
only)
This field is available when you select
PPPoE
encapsulation.
In addition to the ZyXEL Device's built-in PPPoE client, you can enable PPPoE
pass through to allow up to ten hosts on the LAN to use PPPoE client software on
their computers to connect to the ISP via the ZyXEL Device. Each host can have a
separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for application where NAT is not
appropriate.
Disable PPPoE pass through if you do not need to allow hosts on the LAN to use
PPPoE client software on their computers to connect to the ISP.
IP Filter
This section is not available when you configure the ZyXEL Device to be in bridge
mode.
IP Filter
Active
Select this option to enable IP filtering on this connection.
VLAN
VLAN Active
Select this option to enable VLAN multiplexing of multiple protocols over a single
virtual circuit. You need to assign a VLAN ID and priority level to traffic through
each WAN connection. All WAN connections share one MAC address. This allows
the backbone switch to classify and service traffic based on the VLAN tag.
Otherwise, disable VLAN multiplexing and each WAN connection has its own MAC
address.
Note: This field is only configurable for the first WAN connection.
When you change the setting here, all existing WAN
connections will be removed except for the first WAN
connection.
VLAN ID
Enter a VLAN ID number for traffic that goes through this connection.
Priority
Enter a priority level for traffic that goes through this connection.
Back
Click this
to return to the previous screen.
Apply
Click this to save the changes.
Reset
Click this to restore your last-saved settings.
Table 14
WAN > More Connections: Edit: Advanced Setup (continued)
LABEL
DESCRIPTION
Содержание P-870HW-51A V2
