ZyXEL Communications P-791R, Руководство пользователя

Страница: 192 / 358

Chapter 22 Remote Node Setup
P-791R v2 User’s Guide
192
The following table describes the labels in this menu.
22.6 Remote Node ATM Layer Options
Move the cursor to the Edit ATM Options field in menu 11.1, then press [SPACE BAR] to
select
Yes
. Press
[ENTER]
to open this menu. This menu depends on the multiplexing and
encapsulation you select in menu 11.1.
Figure 109 Menu 11.6: Remote Node ATM Layer Options
The following table describes the fields in this menu.
Table 66 Menu 11.5: Remote Node Filter
FIELD DESCRIPTION
Input Filter Sets
protocol filters Enter up to four filter sets. If you enter more than one, separate each one with
a comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate each one with
a comma ( , ).
Output Filter Sets
protocol filters Enter up to four filter sets. If you enter more than one, separate each one with
a comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate each one with
a comma ( , ).
Call Filter Sets These fields appear if you selected PPPoA or PPPoE in Encapsulation in
menu 11.1.
protocol filters Enter up to four filter sets. If you enter more than one, separate each one with
a comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate each one with
a comma ( , ).
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
VPI #= 0
VCI #= 38
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Table 67 Menu 11.6: Remote Node ATM Layer Options
FIELD DESCRIPTION
VPI The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
VCI The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local
management of ATM traffic). Enter the VCI assigned to you.