ZyXEL Communications P-660N-T1A, Руководство пользователя

Страница: 87 / 322

Chapter 7 LAN Setup
P-660N-T1A User’s Guide
87
without it, you must know the IP address of a networking device before you can
access it.
Finding Out More
See Section 7.6 on page 94 for technical background information on LANs.
7.1.3 Before You Begin
Find out the MAC addresses of your network devices if you intend to add them to
the DHCP Client List screen.
7.2 The IP Screen
Use this screen to set the Local Area Network IP address and subnet mask of your
ZyXEL Device. Click
Network > LAN to open the IP screen.
Follow these steps to configure your LAN settings.
1
Enter an IP address into the IP Address field. The IP address must be in dotted
decimal notation. This will become the IP address of your ZyXEL Device.
2
Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
3
Click Apply to save your settings.
Figure 36 Network > LAN > IP