ZyXEL Communications P-660N-T1A, Руководство пользователя

Страница: 41 / 322

Chapter 4 Tutorials
P-660N-T1A User’s Guide
41
4.2.2 Using WPS
This section shows you how to set up a wireless network using WPS. It uses the
ZyXEL Device as the AP and ZyXEL NWD210N as the wireless client which
connects to the notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB
adapter or PCMCIA card).
There are two WPS methods to set up the wireless client settings:
• Push Button Configuration (PBC) - simply press a button. This is the easier
of the two methods.
• PIN Configuration - configure a Personal Identification Number (PIN) on the
ZyXEL Device. A wireless client must also use the same PIN in order to
download the wireless network settings from the ZyXEL Device.
Push Button Configuration (PBC)
1
Make sure that your ZyXEL Device is turned on and your notebook is within the
cover range of the wireless signal.
2
Make sure that you have installed the wireless client driver and utility in your
notebook.
3
In the wireless client utility, go to the WPS setting page. Enable WPS and press
the WPS button (
Start or WPS button).
4
Push and hold the WPS button located on the ZyXEL Device’s rear panel for more
than 5 seconds. Alternatively, you may log into ZyXEL Device’s web configurator
and click the
Push Button in the Network > Wireless LAN > WPS Station
screen.
Note: Your ZyXEL Device has a WPS button located on its rear panel as well as a
WPS button in its configuration utility. Both buttons have exactly the same
function: you can use one or the other.