ZyXEL Confidential
340PE10C0.doc
42/42
del #
Delete a filter which belongs to class # in LAN.
wlan
add #
Daddr <mask
Dmask> Dport Saddr
<mask Smask> Sport
protocol
Add a filter for class # in WLAN. The filter
contains destination address (netmask),
destination port, source address (netmask),
source port and protocol. You may set the value
as 0 if you do not care the item.
del #
Delete a filter which belongs to class # in WLAN.
mpoa[00~
07]
add #
Daddr <mask
Dmask> Dport Saddr
<mask Smask> Sport
protocol
Add a filter for class # in WAN. The filter
contains destination address (netmask),
destination port, source address (netmask),
source port and protocol. You may set the value
as 0 if you do not care the item.
del #
Delete a filter which belongs to class # in WAN.
show
interface
lan
Show the interface settings of LAN
wlan
Show the interface settings of WLAN
mpoa[0
0~07]
Show the interface settings of WAN
class
lan
Show the classes settings of LAN
wlan
Show the classes settings of WLAN
mpoa[0
0~07]
Show the classes settings of WAN
filter
lan
Show the filters settings of LAN
wlan
Show the filters settings of WLAN
mpoa[0
0~07]
Show the filters settings of WAN
statistics
lan
Show the statistics of the classes in LAN
wlan
Show the statistics of the classes in WLAN
mpoa[0
0~07]
Show the statistics of the classes in WAN
monitor
lan
<#>
Monitor the bandwidth of class # in LAN. If the
class is not specific, all the classes in LAN will be
monitored.
The first time you key the command will set it on;
the second time you will set it off, and so on.
wlan
<#>
Monitor the bandwidth of class # in WLAN. If
the class is not specific, all the classes in WLAN
will be monitored.
The first time you key the command will set it on;
the second time you will set it off, and so on.
mpoa[00~
07]
<#>
Monitor the bandwidth of class # in WAN. If the
class is not specific, all the classes in WAN will
be monitored.
The first time you key the command will set it on;
the second time you will set it off, and so on.
config
save
Save the configuration.
load
Load the configuration.
clear
Clear the configuration.
