ZyXEL Confidential
340PE10C0.doc
4/42
(3)After get new IP, internet access will be fail.
11. [BUGFIXED]
SPRID:050916688
Symptom: The "Connection testing" page will not change to " Connection testing Fail"
page If there are no corrcet PVC in hunting table
Condition: If there are no corrcet PVC in hunting table then getHuntState()
function never return AUTO_HUNT_FAIL.
12. [BUGFIXED]
SPRID:050916690
Symptom: If wireless LAN card is removed from P660HW-6x board, rom-t file get from
device will be disorder
Condition: Remove wireless LAN card from device, then get rom-t, title and content will
not
match for some items.
13. [BUGFIXED]
SPRID:050916692
Symptom:In GUI, The WAN Backup functions need at least one none-zero Check WAN
IP
Condition:ICMP mode this is right,but in DSL Link mode this is wrong.
14. [BUGFIXED]
SPRID:050916696
Symptom: lan can’t ping wan when change encapsulation
Condition: 1.lan ping wan 192.168.8.2 continusly.
2.In SMT Menu4,change encapsulation to PPPoE,lan can ping wan.
3.change encapsulation to ENETCAP or RFC1483,lan PC can’t ping wan.
15. [BUGFIXED]
SPRID:050916708
Symptom: Traffic redirect work have problem.
Condition: Step1 Use ENEP ENCAP, in DUT and device in menu 3.2 turn off RIP
Step2 In DUT menu2.1 set backup gateway is 192.168.1.5 and in device 3.2 LAN ip set
192.168.1.5
Step3 from LAN pc ping wan pc 192.168.8.11 -t (same subnet as wan ip) it is ok ,then
pull off DUT wan
line, the traffic go out from device, but when plug into the DUT wan line, then the
traffic can
not go out, pc reboot is ok but use ENET ENCAP ping outside ip such as
202.96.209.5 is ok, and
use PPPOE ping inside ip such as 192.168.8.1 is also ok)
16. [BUGFIXED]
SPRID:050916710
Symptom: If one WLAN client connect to device using WPA-PSK, then change the
mode
from WPA-PSK to WPA. Device will exception.
Condition: If one WLAN client connect to device using WPA-PSK, then change the
mode
from WPA-PSK to WPA. Device will exception.
