ZyXEL Confidential
340PE10C0.doc
19/42
2. [Bug Fixed]
Symptom: Web GUI and SMT setting in firewall are inconsistent on all release before
(PE.4)b1, including (PE.4)b1.
Condition: Previous release were based on old WEB GUI
3. [Bug Fixed]
Symptom: QoS criteria violation.
Do not comply with the rule: Priority
(CBR)
> Priority
(VBR)
> Priority
(UBR)
Condition: When being loaded traffic beyond line rate, the remote node traffic
configured in CBR doesn’t maintain its rate which is achievable. Rather,
CBR traffic could be worse than VBR traffic. It is because the system sets
Priority
(CBR)
= Priority
(VBR).
Modifications in V 3.40(PE.4)b1 | 06/03/2004
1. Change TI datapump to TI AR7 03.00.09.00
Modifications in V 3.40(PE.3)c0 | 05/24/2004
1. Change to FCS version.
Modifications in V 3.40(PE.3)b3 | 05/18/2004
1. [ENHANCEMENT]
Enhance zero configuration web pages.
2. [BUG FIXED]
Symptom: If you set right accounting server, password and enable it, when turn on/off
authentication server or accounting server then system possible occurs
reset.
Condition: This is because when smt23-2 changing setting, system would send out
accounting off packet to server and then create a timer to wait ack in 5
seconds period. Once receiving ack off system would delete parameter
entry_p. In this time the "timer needs be stop" or after next 5 seconds the
parameter entry_p would cause double free problem, then system reset.
3. [BUG FIXED]
Symptom: 802.1x with dynamic WEP key cannot work when shared secret of
accounting server is invalid
Condition: 1. Enable smt23.2 authenticatior server and acctounting server.
2. 802.1x supplicant associate to AP with mode 802.1x dynamic wep.
3. Modify smt23.2 acctounting server shared secret with a wrong value.
4. 802.1x supplicat was prohibited by 802.1x module.
4. [BUG FIXED]
Symptom: SPT would show redundant error message "set TKIP key error" in
Authentication required WPA mode if WPA broadcast key update Timer
expired when wlan is not active
