ZyXEL Communications P-660HN-F1, Руководство пользователя

Страница: 74 / 366

Chapter 3 Tutorials
ADSL Series User’s Guide
74
QoS allows the ADSL Device to group and prioritize application traffic and fine-tune network
performance. The ADSL Device assigns each packet a priority and queues the packet according to
your configured classifiers. Classifiers define how to sort traffic into different flows, assign priority,
and define actions to be performed for classified traffic flows.
Note: QoS is applied to traffic flowing out of the ADSL Device.
Traffic that does not match this class is assigned a priority queue based on the internal QoS
mapping table on the ADSL Device.
1
Click Network Setting > QoS > General and check Active. Set your WAN Managed Upstream
Bandwidth to 1000 kbps (or leave this blank to have the ADSL Device automatically determine
this figure). Click Apply to save your settings.
Tutorial: Advanced > QoS
2
Go to Network Setting > QoS > Queue Setup. Click Add new Queue to create a new queue. In
the screen that opens, check Active and enter or select the following values, then click Apply.
• Name: Email
• Priority: 7 (High)
• Weight: 15
• Rate Limit: 500 (kbps)
3
Go to Network Setting > QoS > Class Setup. Click Add new Classifier to create a new class.
Check Active and follow the settings as shown in the screen below. Then click Apply.