ZyXEL Communications P-660H Series Скачать руководство пользователя страница 199

Страница: 199 / 466

P-660H/HW-T Series User’ Guide

Chapter 17 Maintenance

198

17.2.1 System Statistics

Click

Show Statistics

in the

System Status

screen to open the following screen. Read-only

information here includes port status and packet specific statistics. Also provided are "system
up time" and "poll interval(s)". The

Poll Interval(s)

field is configurable.

ZyNOS Firmware

Version

This is the ZyNOS firmware version and the date created. ZyNOS is ZyXEL's

proprietary Network Operating System design.

DSL FW Version

This is the DSL firmware version associated with your Prestige.

Standard

This is the standard that your Prestige is using.

WAN Information

IP Address

This is the WAN port IP address.

IP Subnet Mask

This is the WAN port IP subnet mask.

Default Gateway

This is the IP address of the default gateway, if applicable.

VPI/VCI

This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in

the first Wizard screen.

LAN Information

MAC Address

This is the MAC (Media Access Control) or Ethernet address unique to your

Prestige.

IP Address

This is the LAN port IP address.

IP Subnet Mask

This is the LAN port IP subnet mask.

DHCP

This is the WAN port DHCP role -

Server

Relay

(not all Prestige models) or

None

DHCP Start IP

This is the first of the contiguous addresses in the IP address pool.

DHCP Pool Size

This is the number of IP addresses in the IP address pool.

WLAN Information

ESSID

This is the descriptive name used to identify the Prestige in the wireless LAN.

Channel

This is the channel number used by the Prestige now.

WEP

This displays the status of WEP data encryption.

Show Statistics

Click

Show Statistics

to see the performance statistics such as number of

packets sent and number of packets received for each port.

Table 62

System Status (continued)

LABEL

DESCRIPTION

Содержание P-660H Series



















































































































































































































































































































































































































































































Результаты поиска

Содержание P-660H Series

Отзывы:

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 199 / 466

Результаты поиска

Содержание P-660H Series

Отзывы: