ZyXEL Communications P-660H Series Скачать руководство пользователя страница 118

Страница: 118 / 466

P-660H/HW-T Series User’ Guide

117

Chapter 9 Time and Date

Table 32

Time and Date

LABEL

DESCRIPTION

Time Server

Use Protocol when

Bootup

Select the time service protocol that your time server sends when you turn on the

Prestige. Not all time servers support all protocols, so you may have to check with

your ISP/network administrator or use trial and error to find a protocol that works.
The main difference between them is the format.

Daytime (RFC 867)

format is day/month/year/time zone of the server.

Time (RFC 868)

format displays a 4-byte integer giving the total number of

seconds since 1970/1/1 at 0:0:0.

NTP (RFC 1305)

is similar to

Time (RFC 868)

Select

None

to enter the time and date manually.

IP Address or URL Enter the IP address or URL of your time server. Check with your ISP/network

administrator if you are unsure of this information.

Time and Date

Choose the time zone of your location. This will set the time difference between

your time zone and Greenwich Mean Time (GMT).

Daylight Savings

Select this option if you use daylight savings time. Daylight saving is a period from

late spring to early fall when many countries set their clocks ahead of normal local

time by one hour to give more daytime light in the evening.

Start Date

Enter the month and day that your daylight-savings time starts on if you selected

Daylight Savings

End Date

Enter the month and day that your daylight-savings time ends on if you selected

Daylight Savings

Synchronize

system clock with

Time Server now.

Select this option to have your Prestige use the time server (that you configured

above) to set its internal system clock.
Please wait for up to 60 seconds while the Prestige locates the time server. If the

Prestige cannot find the time server, please check the time server protocol and its

IP address. If the IP address was entered correctly, try pinging it for example to

test the connection.

Date

Current Date

This field displays the date of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time

server.

New Date (yyyy-

mm-dd)

This field displays the last updated date from the time server.
When you select

None

in the

Use Protocol when Bootup

field, enter the new

date in this field and then click

Apply

Time

Current Time

This field displays the time of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time

server.

New Time

This field displays the last updated time from the time server.
When you select

None

in the

Use Protocol when Bootup

field, enter the new

time in this field and then click

Apply

Apply

Click

Apply

to save your changes back to the Prestige.

Cancel

Click

Cancel

to begin configuring this screen afresh.

Содержание P-660H Series



















































































































































































































































































































































































































































































Результаты поиска

Содержание P-660H Series

Отзывы:

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 118 / 466

Результаты поиска

Содержание P-660H Series

Отзывы: