P-335WT
19
PROBLEM CORRECTIVE
ACTION
Cannot access the
Prestige from the LAN.
Check the cable connection between the Prestige and your computer or hub. Refer to the
Rear Panel
section for details.
Ping the Prestige from a LAN computer. Make sure your computer Ethernet card is installed
and functioning properly.
Cannot ping any
computer on the LAN.
If the 10/100M LAN LEDs are off, check the cable connections between the Prestige and
your LAN computers.
Verify that the IP address and subnet mask of the Prestige and the LAN computers are in the
same IP address range.
The WAN IP is provided after the ISP verifies the MAC address, host name or user ID.
Find out the verification method used by your ISP and configure the corresponding fields.
If the ISP checks the WAN MAC address, you should clone the MAC address from a LAN
computer. Click
WAN
and then the
MAC
tab, select
Spoof this Computer's MAC address -
IP Address
and enter the IP address of the computer on the LAN whose MAC address you
are cloning.
If the ISP checks the host name, enter your computer’s name (refer to the
Wizard Setup
section in the
User’s Guide
) in the
System Name
field in the first screen of the
WIZARD
.
Cannot get a WAN IP
address from the ISP.
If the ISP checks the user ID, click
WAN
and then the
ISP
tab. Check your service type, user
name, and password.
Check the Prestige’s connection to the cable/DSL device.
Check whether your cable/DSL device requires a crossover or straight-through cable.
Cannot access the
Internet.
Click
WAN
to verify your settings.
Содержание P-335WT
Страница 2: ......
Страница 3: ...P 335WT 1 Contents ENGLISH 2 DEUSTCH 20 ESPANOL 41 FRAN AIS 61 ITALIANO 81 101...
Страница 111: ...P 335WT 109 2 1234 Login Reset 3 Apply Ignore...
Страница 113: ...P 335WT 111 4 2 Back Back Next Next Finish Prestige 1 Wizard Setup WIZARD LOGOUT Bandwidth Management...
