ZyXEL Confidential
340adq4c0
24/36
sys save
Save all the parameters which will include menu1, menu 3.2
LAN, menu 4 or menu 11 WAN, menu 12 static route, menu
15 NAT server set, menu 21 filter sets, menu 22 SNMP,
menu 24.11 remote management and 3.5 Wireless LAN
wan backup mechanism [dsl | icmp]
Set wan backup mechanism to DSL link or ICMP
Menu 2
wan backup addr [index] [IP addr]
Set wan ip address <index>
Menu 2
wan backup tolerance [number]
Set keepalive fail tolerance
Menu 2
wan backup recovery [interval(sec)]
Set recovery interval
Menu 2
wan backup timeout [number]
Set ICMP timeout
Menu 2
wan backup save
Save wan backup related parameters
Menu 2
wan backup display
Display wan backup configurations
Menu 2
wan tredir active [on|off]
Set traffic redirect on/off
Menu 2.1
wan tredir ip [IP addr]
Set traffic redirect gateway IP address
Menu 2.1
wan tredir metric [number]
Set traffic redirect metric
Menu 2.1
wan tredir save
Save traffic redirect related parameters
** Have to apply “wan backup save” command thereafter
Menu 2.1
wan tredir display
Display traffic redirect configurations
Menu 2.1
lan index [1|2|3]
1: Select main LAN Interface
2: Select IP Alias 1
3: Select IP Alias 2
Select a LAN interface to edit
Menu 3.2
lan active [on|off]
Turn on or off on IP Alias Interface
Menu 3.2.1
lan ipaddr [address] [subnet mask]
Set LAN IP address and subnet mask
Example:
> lan ipaddr 192.168.1.1 255.255.255.0
Menu 3.2
lan rip [none|in|out|both] [rip1|rip2b|rip2m]
Set LAN IP RIP mode and RIP version, if you choose none in
the first parameter, the second parameter is also necessary
Menu 3.2
lan multicast [none|igmpv1|igmpv2]
Set LAN IP multicast mode
Menu 3.2
lan filter [incoming|outgoing] [tcpip|generic]
[set#1] [set#2] [set#3] [set#4]
Set LAN filter to be incoming/outgoing or protocol /device
and the filter set could be 1-12, 0 means empty
Example:
Lan filter incoming tcpip 1 0 0 0
Menu 3.1
lan dhcp mode [server|relay|none]
Set DHCP mode to be”server”, “relay”, “none”
Menu 3.2
lan dhcp server dnsserver [pri dns] [sec dns] Set primary and secondary LAN DNS server
Menu 3.2
lan dhcp server pool [start-address] [num]
Set DHCP start address and pool size
Menu 3.2
lan dhcp server gateway [IP address]
Set DHCP gateway
Menu 3.2
lan dhcp server netmask [subnet mask]
Set DHCP subnet mask
Menu 3.2
lan dhcp server leasetime [second]
Set DHCP lease time
Menu 3.2
lan dhcp server renewaltime [second]
Set DHCP renew time
Menu 3.2
lan dhcp server rebindtime [second]
Set DHCP rebind time
Menu 3.2
lan dhcp relay server [IP address]
Set IP address of DHCP relay server
Menu 3.2
lan display
Display LAN or IP alias parameters
Display Menu 3
lan clear
Clear the Working Buffer
lan save
Save LAN related parameters
wan node index [1-8]
Set the node pointer to specific wan profile. If you want to set
WAN profile, please use this command first, system will use
the index number for pointing to specific PVC (remote node),
and for consequent commands reference, if index = 1 means
it’s ISP node
Menu 11.1
wan node clear
Clear the parameters of the temporary WAN profile
Menu 11.1
wan node ispname [ISP name]
Enable the name of wan node
Menu 11.1
