ZyXEL Confidential
340adq4c0
19/36
display
<rule #>
Display IPSec rule #
config
netbios
active <on|off>
Set netbios active flag
group <group index1, group index2…>
Set netbios group
name
<string>
Set rule name
active
<Yes
|
No>
Set active or not
keeyAlive
<Yes|
No>
Set keep alive or not
lcIdType
<0:IP | 1:DNS | 2:Email>
Set local ID type
lcIdContent
<string>
Set local ID content
myIpAddr
<IP address>
Set my IP address
peerIdType
<0:IP | 1:DNS | 2:Email>
Set peer ID type
peerIdContent
<string>
Set peer ID content
secureGwAddr <IP address | Domain name>
Set secure gateway address or domain name
protocol
<1:ICMP | 6:TCP | 17:UDP>
Set protocol
lcAddrType
<0:single | 1:range | 2:subnet>
Set local address type
lcAddrStart
<IP>
Set local start address
lcAddrEndMas
k
<IP>
Set local end address or mask
lcPortStart
<port>
Set local start port
lcPortEnd
<port>
Set local end port
rmAddrType
<0:single | 1:range | 2:subnet>
Set remote address type
rmAddrStart
<IP>
Set remote start address
rmAddrEndMa
sk
<IP>
Set remote end address or mask
rmPortStart
<port>
Set remote start port
rmPortEnd
<port>
Set remote end port
antiReplay
<Yes | No>
Set anitreplay or not
keyManage
<0:IKE | 1:Manual>
Set key manage
ike
negotiationMode <0:Main |
1:Aggressive>
Set negotiation mode in phase 1 in IKE
preShareKey <string>
Set pre shared key in phase 1 in IKE
p1EncryAlgo
<0:DES
|
1:3DES>
Set
encryption algorithm in phase 1 in IKE
p1AuthAlgo <0:MD5 | 1:SHA1>
Set authentication algorithm in phase 1 in IKE
p1SaLifeTime <seconds>
Set sa life time in phase 1 in IKE
p1KeyGroup <0:DH1 | 1:DH2>
Set key group in phase 1 in IKE
activeProtocol <0:AH | 1:ESP>
Set active protocol in phase 2 in IKE
p2EncryAlgo <0:Null | 1:DES |
2:3DES>
Set encryption algorithm in phase 2 in IKE
p2AuthAlgo <0:MD5 | 1:SHA1>
Set authentication algorithm in phase 2 in IKE
p2SaLifeTime <seconds>
Set sa life time in phase 2 in IKE
encap <0:Tunnel | 1:Transport>
set encapsulation in phase 2 in IKE
pfs <0:None | 1:DH1 | 2:DH2>
set pfs in phase 2 in IKE
manual
activeProtocol <0:AH | 1:ESP>
Set active protocol in manual
manual ah
encap <0:Tunnel | 1:Transport>
Set encapsulation in ah in manual
spi <decimal>
Set spi in ah in manual
authAlgo <0:MD5 | 1:SHA1>
Set authentication algorithm in ah in manual
authKey <string>
Set authentication key in ah in manual
manual esp
encap <0:Tunnel | 1:Transport>
Set encapsulation in esp in manual
spi <decimal>
Set spi in esp in manual
encryAlgo <0:Null | 1:DES | 2:3DES>
Set encryption algorithm in esp in manual
encryKey <string>
Set encryption key in esp in manual
authAlgo <0:MD5 | 1:SHA1>
Set authentication algorithm in esp in manual
authKey < string>
Set authentication key in esp in manual
