ZyXEL Communications P-2302R-P1 Series, Руководство пользователя

Страница: 143 / 294

P-2302R-P1 Series User’s Guide
Chapter 11 Phone Book 143
11.2.2 Speed Dial Screen
You have to create speed-dial entries if you want to make peer-to-peer calls or call SIP
numbers that use letters. You can also create speed-dial entries for frequently-used SIP phone
numbers. Use this screen to add, edit, or remove speed-dial entries. To access this screen, click
VoIP > Phone Book > Speed Dial .
Advanced Setup The ZyXEL Device checks these rules before it checks the rules in the Forward to
Number section.
# This field is a sequential value, and it is not associated with a specific rule. The
sequence is important, however. The ZyXEL Device checks each rule in order, and
it only follows the first one that applies.
Activate Select this to enable this rule. Clear this to disable this rule.
Incoming Call
Number
Enter the phone number to which this rule applies.
Forward to
Number
Enter the phone number to which you want to forward incoming calls from the
Incoming Call Number . You may leave this field blank, depending on the
Condition .
Condition Select the situations in which you want to forward incoming calls from the
Incoming Call Number , or select an alternative action.
Unconditional - The ZyXEL Device immediately forwards any calls from the
Incoming Call Number to the Forward to Number .
Busy - The ZyXEL Device forwards any calls from the Incoming Call Number to
the Forward to Number when your SIP account already has a call connected.
No Answer - The ZyXEL Device forwards any calls from the Incoming Call
Number to the Forward to Number when the call is unanswered. (See No
Answer Waiting Time .)
Block - The ZyXEL Device rejects calls from the Incoming Call Number .
Accept - The ZyXEL Device allows calls from the Incoming Call Number . You
might create a rule with this condition if you do not want incoming calls from
someone to be forwarded by rules in the Forward to Number section.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.
Table 56 VoIP > Phone Book > Incoming Call Policy
LABEL DESCRIPTION