ZyXEL Communications P-2302HWUDL-P1 Series, Поддержка заметок

Страница: 105 / 185

P2302HWUDL-P1 Support Notes
All contents Copyright

2007 ZyXEL Communications Corporation.
105
Introduction of VoIP Trunking General Configuration
To start using VoIP Trunking Gateway, the user has to activate this function by selecting Enable
Trunking from web GUI VoIP > Trunking > General.
LABEL DESCRIPTION
Enable Trunking Select this to turn on VoIP trunking on your ZyXEL Device.
Auto Attendant
Timeout (Sec.)
This setting determines how long the ZyXEL Device waits for a caller to
enter a phone number when it receives the call.
Enter the number of seconds before the Auto Attendant times out.
The default value is 10 seconds and entering 0 does not change the default.
Enter a value from 1 to 255 seconds. When the auto attendant times out, the
incoming call will be directly relay to the analog phone connected on the
ZyXEL Device FXS port(s) via rings.
Dialing
Interval (Sec.)
Enter the number of seconds the ZyXEL Device should wait after you stop
dialing numbers before it makes the phone call. The value depends on how
quickly you dial phone numbers. The default value is 3 seconds and
entering 0 does not change the default. Enter a value from 1 to 255 seconds.
Enable Auto
Attendant
Authentication
Select this to enable authentication for calls coming into your ZyXEL
Device. Once this feature is enabled, the callers must enter the PIN to
forward calls via your ZyXEL Device.
Password
(Max. 32 digits)
This is the PIN callers have to enter via their phone pad when dialing into
your ZyXEL Device to forward calls through it.