ZyXEL Communications Omni 56K Smart, Руководство пользователя

Страница: 55 / 70

Omni 56K Smart User’s Guide
Command Sets 5-21
Table 5-12 Basic S-Registers "ATSn=x"
COMMAND FUNCTION & DESCRIPTION REF.
S0= Sets the number of rings on which the modem will answer. A
value of 0 disables auto-answering. +000
S1= Counts and stores the number of rings from an incoming
call. +000
S2= Defines the escape code character, default ' +' (43 dec.). A
value of 128-255 disables the escape code. +043
S3= Defines the ASCII Carriage Return. +013
S4= Defines the ASCII Line Feed. +010
S5= Defines the ASCII Backspace key. A value of 128-255
disables the Backspace key' s delete function. +008
S6= Sets the number of seconds the modem waits before dialing
if ' X0' or ' X1' is selected. If a setting of ' X2,' 'X7' is
selected; the modem will dial as soon as it detects a dial
tone. This register also sets the time-out interval for the "W"
dial modifier to wait for the dial tone. (See also S41b4) +003
S7= Sets duration, in number of seconds modem waits for a
carrier. +060
S8= Sets duration, in seconds, for pause (,) option in Dial
command and pause between command re-executions for
Repeat (>) command. +002
S9= Sets duration, in tenths of a second of remote carrier signal
before recognition. (Ignored if in non-FSK or half-duplex
operation) +006
S10= Sets duration, in tenths of a second, that the modem waits
after the carrier is lost before hanging up. +007
S11= Sets duration and spacing, in milliseconds, of dialed Touch-
Tones. +070
5.3.2 Extended S-Registers "ATSn=x"