ZyXEL
OLT-2300 Series Support Notes
All contents copyright
ٛ
2006 ZyXEL Communications Corporation.
8
2. Click “Click Here” link for Load Factory Default.
3. A dialog box pops up with the “Are you sure you want to load factory defaults?”
prompt.
4. Click OK.
5. Click OK again to start the configuration reset process. After it is complete, the
device automatically restarts.
6. Please note that the IP address of the OLT is now 192.168.0.1.
Using the Console Port:
1. Connect to the console port and open the Terminal Emulation Software.
2. Enter the administrator login password to log into the CLI. Enter “erase run” to
load the factory default configuration.
General Networking