ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 431 / 1168

Chapter 12 Statistics Screens
Management Switch Card User’s Guide
431
Figure 288
Port Statistics: DSL Line Card
The following table describes the labels in this screen.
12.11.4.1 DSL Line Card Packet Counter
To display the packet counters of a port on a line card, click the port number in the line card’s
statistics screen (see
Figure 288 on page 431 ).
Table 206
Port Statistics: DSL Line Card
LABEL DESCRIPTION
Port This field displays the port number.
Link This field displays the port link status ( link_down , link_up , or training ).
On an SHDSL port, this field displays the wire pair setting when the port is up.
Name This is the descriptive name that identifies the port or the subscriber connected to the port.
Config Rate This field displays the configured upstream and downstream rates.
Payload Rate This field displays the actual upstream and downstream rates.
Protocol This field displays the protocol with which this port is running.
Error This field displays the number of errors that have occurred on the port.
Rx kbps This field displays the receiving rate in kilo bits per second (kbps).
Tx kbps This field displays the transmission rate in kilo bits per second (kbps).
Uptime This field displays how long the connection is up.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval .
Port Select a port and click Clear counter to reset the port’s packet counter.
Stop Click Stop to stop port statistic polling.