ZyXEL Communications MAX-207HW2R, Руководство пользователя

Страница: 115 / 150

Chapter 11 The Phone Screens
MAX-207HW2R User’s Guide
115
11.3 Common
Click VOICE > Phone > Common to activate and deactivate immediate dialing.
Figure 48 VOICE > Phone > Common
The following table describes the labels in this screen.
Table 42 VOICE > Phone > Common
LABEL DESCRIPTION
Immediate Dial
Active
Immediate Dial
Select this if you want to use the pound key (#) to tell the MAX-
207HW2R to make the phone call immediately, instead of waiting the
number of seconds you selected in the Dialing Interval Select in
VOICE > Phone > Analog Phone.
If you select this, dial the phone number, and then press the pound key
if you do not want to wait. The MAX-207HW2R makes the call
immediately.
Flash Timer
Enable Manual
Setting
Select this check box to enable the manual setting of the flash key
interval timer.
You can activate supplementary services of your phone with the flash
key (see
Section 11.5.1 on page 117 for more information). The
configuration for flash key interval timer depends on your country code.
It is usually pre-configured on your phone device by its manufacturer.
You can set or change it on the MAX-207HW2R if necessary.
Min./Max.
Interval Enter the minimum and maximum timer interval for your flash key.
Contact your phone service provider for the setting values used in your
country.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.