ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite, Руководство пользователя

Страница: 72 / 84

Omni.Net Lite User’s Guide
71 Chapter 4 Using Tone Commands
4.3.2 Storing Phone Number
To store a phone number on the TA, use the
13d*<phone number> [*<sub-
address>]#
command for voice calls. For example, dial
***130*1234567#
to store
1234567 on the TA.The phone number index is 0. See Section 2.12.1 on page 46 on how to
place a voice call.
4.3.3 Setting Ports Priority
To set the same priority for both two ports, use the
***122*0#
command.
To set the PHONE 1 port to have the first priority, use the
***122*1#
command.
To set the PHONE 2 port to have the first priority, use the
***122*2#
command.
4.3.4 Disabling Call Waiting
To disable call waiting on either port, use the
***211*0#
command.
4.3.5 Incoming Call Screening
Use this function to set restrictions on incoming calls.
4.3.5.1 Voice Call
Use
32d*<phone number> [*<sub-address>]#
to configure a list of incoming call
phone numbers (with sub-addresses), ***320*1234567# for example, then use
220*n#
to
reject or accept the calls with the phone number in the list.
4.3.6 Outgoing Call Screening
Use this function to set restrictions on outgoing calls, such as allowing or prohibiting a long-
distance or international call.
4.3.6.1 Voice Call
Use
35d*<prefix digits>#
to configure a list of prefix digits for outgoing call,
***350*080# for example, then use
221*n#
to prohibit or allow the calls with the prefix
digits in the list.
4.3.7 Caller ID
Use
210*n#
to select the device type to enable call waiting caller ID when you have a call
(see Section 3.4.10 on page 65 for more information).