ZyXEL Communications IES-2000, Руководство пользователя

Страница: 225 / 304

IES-2000/3000 User’s Guide
Firmware and Configuration File Maintenance 25-7
Step 4.
Enter your password as requested (the default is “1234”).
Step 5.
Enter “bin” to set transfer mode to binary.
Step 6.
Find the “rom” file (on your computer) that you want to restore to your VLC1012.
Step 7.
Use “put” to transfer files from the VLC1012 to the computer, for example, “put config.rom rom-0”
transfers the configuration file “config.rom” on your computer to the VLC1012. See earlier in this
chapter for more information on filename conventions.
Step 8.
Enter “quit” to exit the ftp prompt. The VLC1012 will automatically restart after a successful restore
process.
25.3.2 FTP Restore Example
Figure 25-8 FTP Restore Example
Refer to section 25.2.5 to read about configurations that disallow TFTP and FTP over WAN.
25.3.3 Restore Via Console Port
Restore configuration via console port by following the HyperTerminal procedure shown next. Procedures using
other serial communications programs should be similar.
Step 1.
Display menu 24.6 and enter “y” at the following screen.
Figure 25-9 System Maintenance - Restore Configuration
Step 2.
The following screen indicates that the Xmodem download has started.
Figure 25-10 System Maintenance - Starting Xmodem Download Screen
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Starting XMODEM download (CRC mode) ...
CCCCCCCCC