ZyXEL Communications GS2200-24P Series Скачать руководство пользователя страница 30

Страница: 30 / 360

Chapter 2 Hardware Installation and Connection

GS2200-24/24P User’s Guide

2.3.1 Rack-mounted Installation Requirements

• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.

2.3.1.1 Precautions

• Make sure the rack will safely support the combined weight of all the equipment

it contains.

• Make sure the position of the Switch does not make the rack unstable or top-

heavy. Take all necessary precautions to anchor the rack securely before

installing the unit.

2.3.2 Attaching the Mounting Brackets to the Switch

Position a mounting bracket on one side of the Switch, lining up the four screw
holes on the bracket with the screw holes on the side of the Switch.

Figure 5

Attaching the Mounting Brackets

Using a #2 Philips screwdriver, install the M3 flat head screws through the
mounting bracket holes into the Switch.

Repeat steps

and

to install the second mounting bracket on the other side of

the Switch.

You may now mount the Switch on a rack. Proceed to the next section.

Содержание GS2200-24P Series









































































































































































































































































































































































Результаты поиска

Содержание GS2200-24P Series

Отзывы:

ZyXEL Communications GS2200-24P Series, Руководство пользователя, Страница: 30 / 360

Результаты поиска

Содержание GS2200-24P Series

Отзывы: