manualshive.com logo in svg

ZyXEL Communications GS2200-24P Series, Руководство пользователя, Страница: 235 / 360

Поделиться
Скачать
ZyXEL Communications GS2200-24P Series Скачать руководство пользователя страница 235

 Chapter 25 IP Source Guard

GS2200-24/24P User’s Guide

235

25.8  ARP Inspection Log Status

Use this screen to look at log messages that were generated by ARP packets and 
that have not been sent to the syslog server yet. To open this screen, click 
Advanced Application > IP Source Guard > ARP Inspection > Log Status.

Figure 123   

ARP Inspection Log Status

The following table describes the labels in this screen.

Reply

This field displays the total number of ARP Reply packets received 
from the VLAN since the Switch last restarted.

Forwarded

This field displays the total number of ARP packets the Switch 
forwarded for the VLAN since the Switch last restarted.

Dropped

This field displays the total number of ARP packets the Switch 
discarded for the VLAN since the Switch last restarted.

Table 72   

ARP Inspection VLAN Status

LABEL

DESCRIPTION

Table 73   

ARP Inspection Log Status

LABEL

DESCRIPTION

Clearing log status 
table

Click Apply to remove all the log messages that were generated by 
ARP packets and that have not been sent to the syslog server yet.

Total number of 
logs

This field displays the number of log messages that were generated 
by ARP packets and that have not been sent to the syslog server yet. 
If one or more log messages are dropped due to unavailable buffer, 
there is an entry called overflow with the current number of 
dropped log messages.

Index

This field displays a sequential number for each log message.

Port

This field displays the source port of the ARP packet.

VID

This field displays the source VLAN ID of the ARP packet.

Sender MAC

This field displays the source MAC address of the ARP packet.

Sender IP

This field displays the source IP address of the ARP packet.

Содержание GS2200-24P Series









































































































































































































































































































































































Отзывы:

Нет отзывов