manualshive.com logo in svg

ZyXEL Communications GS2200-24P Series, Руководство пользователя, Страница: 241 / 360

Поделиться
Скачать
ZyXEL Communications GS2200-24P Series Скачать руководство пользователя страница 241

 Chapter 25 IP Source Guard

GS2200-24/24P User’s Guide

241

25.10  Technical Reference

This section provides technical background information on the topics discussed in 
this chapter.

25.10.1  DHCP Snooping Overview

Use DHCP snooping to filter unauthorized DHCP packets on the network and to 
build the binding table dynamically. This can prevent clients from getting IP 
addresses from unauthorized DHCP servers.

25.10.1.1  Trusted vs. Untrusted Ports

Every port is either a trusted port or an untrusted port for DHCP snooping. This 
setting is independent of the trusted/untrusted setting for ARP inspection. You can 
also specify the maximum number for DHCP packets that each port (trusted or 
untrusted) can receive each second.

VID

This field displays the VLAN ID of each VLAN in the range specified 
above. If you configure the * VLAN, the settings are applied to all 
VLANs.

Enabled

Select Yes to enable ARP inspection on the VLAN. Select No to disable 
ARP inspection on the VLAN.

Log

Specify when the Switch generates log messages for receiving ARP 
packets from the VLAN.

None: The Switch does not generate any log messages when it 
receives an ARP packet from the VLAN.

Deny: The Switch generates log messages when it discards an ARP 
packet from the VLAN.

Permit: The Switch generates log messages when it forwards an ARP 
packet from the VLAN.

All: The Switch generates log messages every time it receives an ARP 
packet from the VLAN.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click this to reset the values in this screen to their last-saved values.

Table 76   

ARP Inspection VLAN Configure (continued)

LABEL

DESCRIPTION

Содержание GS2200-24P Series









































































































































































































































































































































































Отзывы:

Нет отзывов