ZyXEL Communications G-2000 Plus V2, Руководство пользователя

Страница: 397 / 440

ZyXEL G-2000 Plus v2 User’s Guide
397
Configuring What You Want the ZyXEL device to Log
Use the
sys logs load
command to load the log setting buffer that allows you to configure which logs
the
ZyXEL device
is to record.
Use
sys logs category
followed by a log category and a parameter to decide what to record
Use the
sys logs save
command to store the settings in the
ZyXEL device
(you must do this in
order to record logs).
Displaying Logs
Use the
sys logs display
command to show all of the logs in the
ZyXEL device
’s log.
Use the
sys logs category display
command to show the log settings for all of the log categories.
Use the
sys logs display [log category]
command to show the logs in an individual
ZyXEL
device
log category.
Use the
sys logs clear
command to erase all of the
ZyXEL device
’s logs.
Table 154 Log Categories and Available Settings
LOG CATEGORIES AVAILABLE PARAMETERS
8021x 0, 1
access 0, 1, 2, 3
attack 0, 1, 2, 3
error 0, 1, 2, 3
icmp 0, 1
javablocked 0, 1, 2, 3
mten 0, 1
packetfilter 0, 1
remote 0, 1
tcpreset 0, 1
upnp 0, 1
urlblocked 0, 1, 2, 3
urlforward 0, 1
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only
alerts for that category, and 3 to record both logs and alerts for that category.