ZyXEL Communications EMG3425-Q10A, Руководство пользователя

Страница: 140 / 250

Chapter 20 Bandwidth Management
EMG3425-Q10A User’s Guide
140
The following table describes the labels in this screen.
Table 60
Management > Bandwidth MGMT > Class Setup: Add/Edit new class
LABEL DESCRIPTION
Step 1: Class Configuration
Active Select this to enable this classifier.
Class Name Enter a descriptive name of up to 15 printable English keyboard characters, not including
spaces.
Classification
Order Select an existing number for where you want to put this classifier to move the classifier to
the number you selected after clicking
Apply .
Select Last to put this rule in the back of the classifier list.
Step 2: Criteria Configuration
Basic
WAN
interface(LAN
interface) If you select From LAN in the Interface field, you can select specific interface(s) from which
traffic is received. ra0 ~ ra3 means wireless interfaces WLAN0 to WLAN3.
If you select From WAN in the Interface field, you can select a specific WAN connection
(PVC0~PVC2) from which traffic is received.
Ether Type Select a predefined application to configure a class for the matched traffic.
If you select IP , you also need to configure source or destination MAC address, IP address,
DHCP options, DSCP value or the protocol type.
If you select ARP , you also need to configure source or destination MAC address.
If you select 802.1Q , you can configure an 802.1p priority level.
Source
Address Select the check box and enter the source IP address in dotted decimal notation. A blank
source IP address means any source IP address.
Subnet
Netmask
Enter the source subnet mask.
Port Range If you select TCP or UDP in the IP Protocol field, select the check box and enter the port
number(s) of the source.
MAC
Address
Select the check box and enter the source MAC address of the packet.
MAC Mask Type the mask for the specified MAC address to determine which bits a packet’s MAC
address should match.
Enter “f” for each bit of the specified source MAC address that the traffic’s MAC address
should match. Enter “0” for the bit(s) of the matched traffic’s MAC address, which can be of
any hexadecimal character(s). For example, if you set the MAC address to
00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of
00:13:49:12:34:56 matches this criteria.
Exclude Select this option to exclude the packets that match the specified criteria from this classifier.
Destination
Address Select the check box and enter the source IP address in dotted decimal notation. A blank
source IP address means any source IP address.
Subnet
Netmask
Enter the source subnet mask.
Port Range If you select TCP or UDP in the IP Protocol field, select the check box and enter the port
number(s) of the source.
MAC
Address
Select the check box and enter the source MAC address of the packet.