manualshive.com logo in svg

ZyXEL Communications Dimension GS-3012, Руководство пользователя, Страница: 62 / 259

Поделиться
Скачать
ZyXEL Communications Dimension GS-3012 Скачать руководство пользователя страница 62

GS-3012/GS-3012F User’s Guide 

5-4 

System Status and Port Details 

Table 5-2 Status: Port Details 

LABEL DESCRIPTION 

Tx KB/s  This field shows the number kilobytes per second transmitted on this port. 

Rx KB/s  This field shows the number of kilobytes per second received on this port. 

Up Time 

 

This field shows the total amount of time the connection has been up.

 

Tx Packet

 

The following fields display detailed information about frames transmitted.

 

TX Packets

 

This field shows the number of good frames (unicast, multicast and broadcast) transmitted.

 

Multicast

 

This field shows the number of good multicast frames transmitted.

 

Broadcast

 

This field shows the number of good broadcast frames transmitted.

 

Pause

 

This field shows the number of 802.3x Pause frames transmitted.

 

Tagged

 

This field shows the number of frames with VLAN tags transmitted.

 

Rx Packet 

 

The following fields display detailed information about frames received.

 

RX Packets

 

This field shows the number of good frames (unicast, multicast and broadcast) received.

 

Multicast

 

This field shows the number of good multicast frames received.

 

Broadcast

 

This field shows the number of good broadcast frames received.

 

Pause

 

This field shows the number of 802.3x Pause frames received.

 

Control

 

This field shows the number of control received (including those with CRC error) but it does not 
include the 802.3x Pause frames.

 

TX Collision 

The following fields display information on collisions while transmitting. 

Single  This is a count of successfully transmitted frames for which transmission is inhibited by exactly one 

collision. 

Multiple  This is a count of successfully transmitted frames for which transmission was inhibited by more than 

one collision. 

Excessive  This is a count of frames for which transmission failed due to excessive collisions. Excessive 

collision is defined as the number of maximum collisions before the retransmission count is reset. 

Late  This is the number of times a late collision is detected, that is, after 512 bits of the frame have 

already been transmitted. 

Error Packet 

 

The following fields display detailed information about frames received that were in error.

 

RX CRC  This field shows the number of frames received with CRC (Cyclic Redundant Check) error(s). 

Length  This field shows the number of frames received with a length that was out of range. 

Содержание Dimension GS-3012




































































































































































































































































Отзывы:

Нет отзывов