ZyXEL Communications Dimension GS-3012, Руководство пользователя, Страница: 218 / 259

GS-3012/GS-3012F User’s Guide
30-24 Introducing the Commands
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
bpdu-control <peer|tunnel|discard|network> Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
cable_diagnostics Displays whether a cable is
connected to the port (
good ) or
not ( open ).
dlf-limit Enables the Destination Lookup
Failure (DLF) limit.
<pkt/s> Sets the interface DLF limit in
packets per second (pps).
egress set <port-list> Sets the outgoing traffic port list
for a port-based VLAN.
exit Exits from the interface
configuration command set.
flow-control Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
frame-type <all|tagged> Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
gvrp Enables this function to permit
VLAN groups beyond the local
switch.
help Displays a description of the
interface commands.
igmp-filtering
profile <name>
Sets the IGMP filtering profile for
this port.
igmp-group-limited Limits the number of multicast
groups.
igmp-group-limited
number <number>
Sets the number of multicast
groups this port is allowed to join.
igmp-immediate-
leave
Enables IGMP immediate leave
on the port.
igmp-querier-mode
<auto|fixed|edge>
Sets the IGMP querier mode of a
port.
auto
uses the port as an
IGMP query port after it receives
IGMP query packets.
fixed
always uses the port as an IGMP
query port.
edge
stops the
switch from using the port as an
IGMP query port.
inactive Disables the specified interface
on the switch