manualshive.com logo in svg

ZyXEL Communications Dimension GS-3012, Руководство пользователя, Страница: 144 / 259

Поделиться
Скачать
ZyXEL Communications Dimension GS-3012 Скачать руководство пользователя страница 144

GS-3012/GS-3012F User’s Guide 

20-4 

Multicast 

Table 20-2 Multicast Setting 

LABEL DESCRIPTION 

IGMP Querier 
Mode 

 

The switch treats an IGMP query port as being connected to an IGMP multicast router (or 
server). The switch forwards IGMP join or leave packets to an IGMP query port.  

Select 

Auto

 to have the switch use the port as an IGMP query port if the port receives IGMP 

query packets. 

Select 

Fixed

 to have the switch always use the port as an IGMP query port. Select this when 

you connect an IGMP multicast server to the port. 

Select 

Edge

 to stop the switch from using the port as an IGMP query port. The switch will not 

keep any record of an IGMP router being connected to this port. The switch does not forward 
IGMP join or leave packets to this port.  

Apply Click 

Apply

 to save your changes back to the switch. 

Cancel Click 

Cancel

 to begin configuring this screen afresh. 

20.4 IGMP Filtering Profile  

IGMP filter profiles allow you to control access to IGMP multicast groups. This allows you to have a service 
available to a specific IGMP multicast group. You can configure an IGMP filter profile for an IGMP multicast 
group that has access to a service (like a SIP server for example). Within a profile, configure an IGMP filter to 
specify the multicast IP address ranges. Then assign the IGMP filter profile to the ports (in the 

Multicast

 

Setting

 

screen) that are allowed to use the service.  

Click

 Advanced Applications

 and 

Multicast 

in the navigation panel. Click the 

Multicast Setting 

link and then the 

IGMP Filtering Profile 

link to display the screen as shown. 

 

Figure 20-3 Multicast: IGMP Filtering Profile 

The following table describes the labels in this screen. 

Содержание Dimension GS-3012




































































































































































































































































Отзывы:

Нет отзывов