manualshive.com logo in svg

ZyXEL Communications Dimension GS-2024, Руководство пользователя

Сетевой коммутатор ZyXEL Communications Dimension GS-2024 - это мощное устройство для организации сетей. Чтобы использовать его на полную мощность, следует прочитать руководство пользователя. На нашем веб-сайте вы можете бесплатно скачать руководство пользователя на русском языке.

Поделиться
Скачать
background image

Chapter 3 Hardware Overview

GS-2024 User’s Guide

38

3.1.1  1000Base-T Ports

The Switch has 24 1000Base-T auto-negotiating, auto-crossover Ethernet ports. In 100/1000 
Mbps Gigabit Ethernet, the speed can be 100 Mbps or 1000 Mbps. The duplex mode can be 
both half or full duplex at 100 Mbps and full duplex only at 1000 Mbps.
An auto-negotiating port can detect and adjust to the optimum Ethernet speed (100/1000 
Mbps) and duplex mode (full duplex or half duplex) of the connected device.
An auto-crossover (auto-MDI/MDI-X) port automatically works with a straight-through or 
crossover Ethernet cable.
Two of the 1000Base-T Ethernet ports are paired with a mini-GBIC slot to create a dual 
personality interface. The Switch uses up to one connection for each mini-GBIC and 
1000Base-T Ethernet pair. The mini-GBIC slots have priority over the Gigabit ports. This 
means that if a mini-GBIC slot and the corresponding Gigabit port are connected at the same 
time, the Gigabit port will be disabled.
When auto-negotiation is turned on, a Gigabit port negotiates with the peer automatically to 
determine the connection speed and duplex mode. If the peer Ethernet port does not support 
auto-negotiation or turns off this feature, the Switch determines the connection speed by 
detecting the signal on the cable and using half duplex mode. When the Switch’s auto-
negotiation is turned off, a Gigabit port uses the pre-configured speed and duplex mode when 
making a connection, thus requiring you to make sure that the settings of the peer Ethernet port 
are the same in order to connect.

3.1.1.1  Default Ethernet Settings

The factory default negotiation settings for the Ethernet ports on the Switch are:

• Speed: Auto
• Duplex: Auto
• Flow control: Off
• Link aggregation: Off

3.1.1.2  Auto-crossover

All ports are auto-crossover, that is auto-MDIX ports (Media Dependent Interface Crossover), 
so you may use either a straight-through Ethernet cable or crossover Ethernet cable for all 
Gigabit port connections. Auto-crossover ports automatically sense whether they need to 
function as crossover or straight ports, so crossover cables can connect both computers and 
switches/hubs.

3.1.2  Dual Personality Interfaces

Dual Personality interfaces comprise 1000Base-T/mini-GBIC combo ports. For each interface 
you can connect either to the 1000Base-T port or the mini-GBIC port. The mini-GBIC ports 
have priority over the 1000Base-T ports. This means that if a mini-GBIC port and the 
corresponding 1000Base-T port are connected at the same time, the 1000Base-T port will be 
disabled.

Содержание Dimension GS-2024











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Dimension GS-2024

D-Link DSL-2750U Setup preview
DSL-2750U
Бренд: D-Link Страницы: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Бренд: D-Link Страницы: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Бренд: D-Link Страницы: 41
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Бренд: 3Com Страницы: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Бренд: 3Com Страницы: 26
Accelerated 6330-MX User Manual preview
6330-MX
Бренд: Accelerated Страницы: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Бренд: Accelerated Страницы: 4
Idis DR-4100P Series Installation Manual preview
DR-4100P Series
Бренд: Idis Страницы: 30
IBM 8677 - BladeCenter Rack-mountable - Power... Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power...
Бренд: IBM Страницы: 126
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Бренд: LaCie Страницы: 5
Far Tools MR 40PB Original Manual Translation preview
MR 40PB
Бренд: Far Tools Страницы: 24
C-Com IPAM-1600s Series User Manual preview
IPAM-1600s Series
Бренд: C-Com Страницы: 148
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Бренд: AYRSTONE Страницы: 2
Avaya ERS 5510 Technical Configuration Manual preview
ERS 5510
Бренд: Avaya Страницы: 73
Buffalo AirStation WZR-1166DHP Quick Setup Manual preview
AirStation WZR-1166DHP
Бренд: Buffalo Страницы: 2
B&B Electronics EIP308 Product Information preview
EIP308
Бренд: B&B Electronics Страницы: 2
B&B Electronics Elinx EIR508 Series Quick Start Manual preview
Elinx EIR508 Series
Бренд: B&B Electronics Страницы: 2
Symantec SV1800 Series Safety And Regulatory Compliance Manual preview
SV1800 Series
Бренд: Symantec Страницы: 100

Бренды по названию

Популярные бренды

Загрузить еще бренды