ZyXEL Communications Centralized Network Management Vantage CNM, Руководство пользователя

Страница: 191 / 430

Chapter 7 Device Advanced Settings
Vantage CNM User’s Guide
191
7.4 Trigger Port
Use this screen to configure trigger port forwarding on the device. To open this screen, click a
device, click
Device Operation in the menu bar and then click Device Configuration >
Advanced > NAT > Trigger Port in the navigation panel.
Figure 90 Device Operation > Device Configuration > Advanced > NAT > Trigger Port
The following table describes the labels in this screen.
Local End IP This is the end Inside Local IP Address (ILA). If your rule is for all local IP
addresses, then enter 0.0.0.0 as the
Local Start IP address and
255.255.255.255 as the Local End IP address.
This field is N/A for One-to-One and Server mapping types.
Global Start IP This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have
a dynamic IP address from your ISP.
Global End IP This is the ending Inside Global IP Address (IGA). This field is N/A for One-to-
One , Many-to-One and Server mapping types.
Apply Click Apply to save your changes back to the device.
Cancel Click Cancel to return to the previous screen.
Table 79 Device Operation > Device Configuration > Advanced > NAT > Address Mapping >
Edit (continued)
LABEL DESCRIPTION
Table 80 Device Operation > Device Configuration > Advanced > NAT > Trigger Port
LABEL DESCRIPTION
WAN
Interface Select a WAN port to use the port triggering rule.
# This is the number of an individual entry.
Name This field displays a unique name (up to 15 characters) for identification purposes.
Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The device forwards the traffic with this port (or range of ports)
to the client computer on the LAN that requested the service.