5
3. USB
: You can connect a USB memory stick or a USB hard drive for
file sharing. The Device automatically detects the USB device.
Alternatively, use a USB cable (not provided) to connect a USB
printer to this port.
4. VOIP
: Use a telephone cable (and any telephone adaptor provided
with your C2100Z) to connect a telephone to the
VoIP 1
or
VoIP 2
port. If you only have one telephone, you should use port 1.
5. HPNA
: Use a coaxial cable to connect to a coaxial outlet and relay
Internet traffic throughout your house through coaxial cabling.
6. POWER
: Use the provided power adaptor to connect the
POWER
socket to an appropriate power source. Make sure the power at the
outlet is on. After connecting the power adaptor, look at the lights on
the front panel.
• The
POWER
light blinks while your Device starts up and then stays
on once it is ready.
• The
DSL
lights are either amber or green (depending on your
configuration method, see
) when your
Device has a DSL connection.
• The
INTERNET
light turns on when the gateway is able to access
the Internet and will blink when your Device is sending or receiving
data.
• The
WAN/LAN
light is on if the WAN/LAN port is properly connected
and blinks when there is traffic.
• Each
ETHERNET
light is on if the corresponding LAN
port is
properly connected and blinks when there is traffic.
• The
USB
light turns on when there is a USB printer or memory
device is connected to the Device and blinks when transmitting data.
• The
Wi-Fi 2.4G
light is green when the wireless LAN is ready and
blinks when there is traffic.
• The
Wi-Fi 5G
light is green when the wireless LAN is ready and
blinks when there is traffic.
