ZyXEL Communications C2100Z Скачать руководство пользователя страница 15

15

FCC REQUIREMENTS:

This equipment complies with TIA-968-B of FCC Rules. On the bass unit of this 
equipment is a label that contains, among other information, the FCC Registration 
Number and Ringer Equivalence Number (REN) for this equipment. IF 
REQUESTED, THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE 
COMPANY.
The REN is useful to determine the quantity of devices you may connect to your 
telephone line and still have all of those devices ring when your telephone number 
is called. In most, but not all areas, the sum of the REN of all devices connected to 
one line should not exceed five (5.0). To be certain of the number of devices you 
may connect to you line, as determined by the REN, you should contact your local 
telephone company to determine the maximum REN for your calling area.
If your equipment causes harm to the telephone network, the telephone company 
may discontinue your service temporarily. If possible, they will notify you in 
advance. But if advance notice is not practical, you will be notified as soon as 
possible. You will be informed of your right to file a complaint with the FCC. Your 
telephone company may make changes in it is facilities, equipment, operations or 
procedures that could affect the proper functioning of your equipment. If they do, 
you will be notified in advance to give you an opportunity to maintain uninterrupted 
telephone service.
If you experience trouble with this telephone equipment, please contact the 
following address and phone number for information on obtaining service or 
repairs.
The telephone company may ask that you disconnect this equipment from the 
network until the problem has been corrected or until you are sure that the 
equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone 
company. Connection to party lines is subject to state tariffs.

COMPANY: ZyXEL Communications Inc.
ADDRESS: 1130 N. Miller St., Anaheim CA, 92806 USA
TEL NO.: 714-6320882

Содержание C2100Z


















Отзывы: